Acrylic cages

I just bought an acrylic cage, I was just wondering what the proper way of heating it would be. Would heat tape stuck to the back of it cause cracking?

Flexwatt can be used, but I would insulate it and use a thermostat. Here's a link to what could happen if a thermostat isn't used: http://www.arbreptiles.com/cages/flexburn.html. I'm not sure how thick your acrylic cages are, but ours are a minimum of 1/4" and at between 350-375 they become pliable, and can melt at 400. Lamps and bulbs can easily reach these temps, so don't put them directly on or against the acrylic. You can cut a whole in the acrylic, cover it with metal screen and put lamps on that if you wish to use them.

Important note about cleaning it: Don't use window cleaner or anything with ammonia! Use a mild detergent, hot water and a soft terry cloth. Avoid abrasives, as they may scratch.

I'd love to see if there's anyone who has other heating options.

Hope I've helped.

heat panel is one way. with thermostat to control the temp.
i hear it work good because the back of the product does not get to hot. just my .02