Vision 1756 ?

oh - and the first 6 ft of cable is unheated lead, so you can plan accordingly

Originally Posted by AncientDNA

Yes
Have you read the other thread on Vision racks?
Anyway, I use 2 cables to get the temps I want & HerpStat Pro's. They have four outputs(more if you're creative). I have the temps set at about ~92-93 to get ~89-90.

Yea I read it - I'm running the HSII's so I have more probes available if needed to add more cable - Just trying to see if it could be achieved using the 39 foot of heat cable they sent "less the cold lead".

Perhaps I'll just pick up more cable, and go that route - I initially tried running more per shelf, however came up short with what was sent...

Thanks for your input

Originally Posted by hhmoore

Personally, I didn't have enough cable for either configuration, so I have 2 unheated shelves on each rack

I was sent the 39 foot length - subtract the 6 for cold lead, and took me four times installing the cable before I could get enough (?) to do each shelf...

Well I moved the probe under the tub last night, in one of the grooves with the cable but I am only picking up 84-85 this morning with the temp gun - I'm going to pick up another cable today and add more per shelf...

I ended up buying another indentical cable, shut everything down, re-installed the cable adding more to each shelf, plugging both cables into one side of the T stat, using one probe, and everything seems to be on the money now - I thank you guys for your help