• Posted 12/19/2024.
    =====================

    I am still waiting on my developer to finish up on the Classifieds Control Panel so I can use it to encourage members into becoming paying members. Google Adsense has become a real burden on the viewing of this site, but honestly it is the ONLY source of income now that keeps it afloat. I tried offering disabling the ads being viewed by paying members, but apparently that is not enough incentive. Quite frankly, Google Adsense has dropped down to where it barely brings in enough daily to match even a single paid member per day. But it still gets the bills paid. But at what cost?

    So even without the classifieds control panel being complete, I believe I am going to have to disable those Google ads completely and likely disable some options here that have been free since going to the new platform. Like classified ad bumping, member name changes, and anything else I can use to encourage this site to be supported by the members instead of the Google Adsense ads.

    But there is risk involved. I will not pay out of pocket for very long during this last ditch experimental effort. If I find that the membership does not want to support this site with memberships, then I cannot support your being able to post your classified ads here for free. No, I am not intending to start charging for your posting ads here. I will just shut the site down and that will be it. I will be done with FaunaClassifieds. I certainly don't need this, and can live the rest of my life just fine without it. If I see that no one else really wants it to survive neither, then so be it. It goes away and you all can just go elsewhere to advertise your animals and merchandise.

    Not sure when this will take place, and I don't intend to give any further warning concerning the disabling of the Google Adsense. Just as there probably won't be any warning if I decide to close down this site. You will just come here and there will be some sort of message that the site is gone, and you have a nice day.

    I have been trying to make a go of this site for a very long time. And quite frankly, I am just tired of trying. I had hoped that enough people would be willing to help me help you all have a free outlet to offer your stuff for sale. But every year I see less and less people coming to this site, much less supporting it financially. That is fine. I tried. I retired the SerpenCo business about 14 years ago, so retiring out of this business completely is not that big if a step for me, nor will it be especially painful to do. When I was in Thailand, I did not check in here for three weeks. I didn't miss it even a little bit. So if you all want it to remain, it will be in your hands. I really don't care either way.

    =====================
    Some people have indicated that finding the method to contribute is rather difficult. And I have to admit, that it is not all that obvious. So to help, here is a thread to help as a quide. How to become a contributing member of FaunaClassifieds.

    And for the record, I will be shutting down the Google Adsense ads on January 1, 2025.
  • Responding to email notices you receive.
    **************************************************
    In short, DON'T! Email notices are to ONLY alert you of a reply to your private message or your ad on this site. Replying to the email just wastes your time as it goes NOWHERE, and probably pisses off the person you thought you replied to when they think you just ignored them. So instead of complaining to me about your messages not being replied to from this site via email, please READ that email notice that plainly states what you need to do in order to reply to who you are trying to converse with.

Homemade Cages and Enclosures

crazycoolpaul

crazycoolpaul

It's All About The Dragon
Resident Demon
Joined
Jun 4, 2009
Messages
266
Reaction score
8
Points
0
Location
Mount Airy, Maryland
So let's start a thread of your homemade Cages and Enclosures
No matter if it's wood to melamine, glass to plastic

If you have Enclosure specs and would like to share with other members please do as many people have no idea the idea's some of us creative people are when it comes to building cages and Enclosures for our reptiles.​
 
Last edited by a moderator:
I am incredibly curious how you do the lighting inside the cage? That is the only thing stopping me from building some of my own. It's probably simple and I'm just a ditz but I really am clueless,lol!
 
Iguanachic said:
I am incredibly curious how you do the lighting inside the cage? That is the only thing stopping me from building some of my own. It's probably simple and I'm just a ditz but I really am clueless,lol!
Click to expand...

Well i have a 3' florescent fixture screwed to the top of the cage and a basic outdoor flood set up for my heat source also screwed to the top of the cage both with 8' of cord w/ a plug. Now this setup is not recommended for snakes as they could easily burn themselves. I use these to house bearded dragons. I did a trial and error till i found what worked best
 
Last edited by a moderator:
nice setup Paul, I use a similiar look but instead of the flood light I use a standard light houseing unit with an electric cord that as the plug for outlets but the otherside is just bare wire and wire in the light! I will take some pictures and post them of what I have! I use melamine myself and the specs are

2- 24Dx48L
2- 22 1/2D x 16 H
1- 48 W x 17 1/2 H
1- 2 x 46 1/2
1 - 3 1/2 x 46 1/2

I would then just buy some plexi at lowes or homedepot for the glass and get the glass track online!

I'll post pics later and show you what I got once I find my camera!
 
I had an awful time finding melamine. Where did you get it from? All I found was at lowes, they had pre-made shelves built out of it.
 
try lowes and homedepot, its smaller sheets then plywood and heavy as crap, but they cut it for you there at a cheap price
 
I have also seen melamine at homedepot, I was fortunate to know a place that did custom closets with melamine and I ordered it through them! If you get a full sheet of melamine becareful if you have them cut it. I've heard that they will do a free cut but then charge you to cut the wood after that. One more thing becareful of the edges on melamine it is sharp and may cut your hand, just a word of advice from experience...LOL I would look on the web and see if you can find a place that uses melamine and see if you can give them specs and cut it for you. Just another option. If you do cut it yourself just be sure to do a partial cut with a saw not all the way through the wood and then do a second cut that is all the way through. That will help to reduce the chipping in the wood for a nice clean cut. I'm kinda OCD when it comes to the tanks and like them nice and clean with no chips! If they have the pre-made shelves that can work to you will have to upgrade to a bigger size later but can work for juvie dragons. Here is a pic of the shelves used for tanks. Once I find my camera I'll take shots of my bigger tanks. The picture here is from a friend that used to breed dragons and he gave me this as an option also!
 
Last edited by a moderator:
Wow, Paul! Those are really nice!

This is a rack I built last year. It's made of melamine which needed to be waterproofed. I needed something that would pass for a wardrobe closet. I have also made decorated doors since these photos were taken.

100_2564.jpg

100_2563.jpg

100_2570.jpg

100_2577.jpg
 
mxracer4life said:
I had an awful time finding melamine. Where did you get it from? All I found was at lowes, they had pre-made shelves built out of it.
Click to expand...
I found my melamine precut at home depot. I only really had to cut the side pieces and the front lip to hold in substrate and the rear for venting. My cages measure roughly 4'x2'x18"

Wow, Paul! Those are really nice!
Click to expand...

Thanks Kimberly
That's funny you had to camouflage it as a wardrobe piece of furniture
 
The baby cages

The baby cages
Now these i made just for my baby dragons
3/4 melamine 1 piece unit that I'm not done with, as i have 3 more to build on top of these.
dimensions are 3'x16"x12" with a 2' under cabinet florescent in each
I only use a 35 watt heating bulb in the bottom and a 25 watt bulb in the top cage as there in the basement of my house and as i build more the heating will decrease in wattage. You ask why? well the top of the bottom cage is the bottom of the next cage, melamine is known for being able to contain heat and absorb heat unlike other wood composite material. i have track for my 1/4 glass doors witch makes removing the glass easy and a 1" gap in the back for venting. I have to spots hooked up 1 for day and 1 for when it does get cold an inferred ceramic bulb could be added
 
Last edited by a moderator:
Paul I was wondering do you edgeband the pieces yourself or do you buy them that way?
 
Iguanachic said:
I love your cages Paul! Wanna come visit PA and build me a few or a dozen? lol.
Click to expand...
Thanks!!! sure I'd love to take a trip to pa. I want to go to the hamburg show i have never been.

beardedbrad612 said:
Paul I was wondering do you edgeband the pieces yourself or do you buy them that way?
Click to expand...
Yes brad i iron on my own 3/4 band. I like the finish look and it only take 10 min or so to do
 
Thanks!!! sure I'd love to take a trip to pa. I want to go to the hamburg show i have never been.
Click to expand...

I like the Hamburg show. It isn't huge but it does have a great selection. If you head to the next one let me know and we'll meet up!
 
Iguanachic said:
I like the Hamburg show. It isn't huge but it does have a great selection. If you head to the next one let me know and we'll meet up!
Click to expand...
I think i will be at the next one, I have a few friends that set up at that show and i think this time I'm going to make the 3 hour trip and go. Maybe meet some new people like yourself and i might just even buy something you never know. I do have a bunch of baby leatherback dragons to sell so we shall see.
 
Yes brad i iron on my own 3/4 band. I like the finish look and it only take 10 min or so to do[/QUOTE]

Well you did a great job on it!!! I have never tried to do it but it looks like a pain to do good job on it!:thumbsup: If you get a chance pm me the specs on the baby tanks or post them would love to know what sizes you have I got to get going on some of the baby tanks myself and would love to use melamine on them not a fan of baby bins and glass tanks!!
 
Here are my custom enclosures, 1st one is my beardie enclosure
IMG_3477.jpg


This is my Frilled Dragon enclosure.
IMG_7083.jpg

IMG_7085.jpg

IMG_7087.jpg

 
I've used rope lighting inside cages run along the ceiling of plastic and pvc cages (with the clips that came with the rope lights, or with zip ties) with good results. Heats the cage a little bit, and provides a nice ambient light that isn't as harsh as fluorescent, and the rope lights can be dimmed with a rheostat. You just have to be careful when cutting rope light to length as it can only be cut at certain locations without making some of the lights go out. It's a pain to install, but looks good when finished.
 
You must log in or register to reply here.
Back
Top