• In case most of you have not noticed, I made changes to the donation amounts as well as the durations for all of the paid membership levels. Things are winding down here, and this seems to be the most prudent way to deal with the "end of life" period of this site.

    Contributor level members - $10 per 30 days
    Sponsors - Eliminated
    Benefactor level members - $25 per 30 days
    Endowment level members - $50 per 30 days

    Account Upgrades Page
  • Responding to email notices you receive.
    **************************************************
    In short, DON'T! Email notices are to ONLY alert you of a reply to your private message or your ad on this site. Replying to the email just wastes your time as it goes NOWHERE, and probably pisses off the person you thought you replied to when they think you just ignored them. So instead of complaining to me about your messages not being replied to from this site via email, please READ that email notice that plainly states what you need to do in order to reply to who you are trying to converse with.

Blocking Ledge Above Doors In Vision Cage

T

thesarge2014

New member
Joined
Jul 14, 2014
Messages
24
Reaction score
0
Points
1
Location
McKeesport, PA
I would like to block off the ledge inside a Vision cage that runs above the doors. I want to prevent snakes from getting up into that ledge. What would be the best way to do this? I thank you for your help.
 
I've seen people cut wood to fit (which could be a pain with the ends of the pop rivets holding the tracks in place) and also seen people use spray foam. I wouldn't be inclined to use the spray foam method since it'd be difficult to seal the porous surface to keep it from getting gross down the road. What makes you want to block the ledge off? One of my arabesque boas regularly climbs up on the ledge and hangs out, but it doesn't pose a problem for me.
 
I've seen people use a packing foam. Nice and compressible, so you can make it fit, and it would expand out and the pressure would keep it in place (if the snake doesn't somehow knock it out).

One reason to do this, that I've seen, is for venomous snakes. Makes it a little safer to work in the cage as the animal isn't scrunched up out of sight on that ledge.
 
Donald C said:
One reason to do this, that I've seen, is for venomous snakes. Makes it a little safer to work in the cage as the animal isn't scrunched up out of sight on that ledge.
Click to expand...

I can understand that benefit for keeping hots where you can see and work with them.

The packing foam sounds like a reasonably effective method, could easily be ripped out and replaced every now and then to keep it from getting nasty as well.
 
Thanks for the replies and good suggestions. In the past I heard of blocking off the ledge with PVC pipe or a large wooden dowel rod but wonder about that due to the rivets. Maybe the right size rod can be wedged in there.

My reason is I have a smaller new python that is just staying up inside the ledge. I want him to be down in the cage to get more acclimated to it. Also for taming the snake can feel more cornered when you reach up into the ledge to take him out. Though rare it has happened that snakes falling off that ledge and catching their heads at the end of the ledge and breaking their necks. I have seen some of mine fall off the ledge and lately the thought of that bothers me. Vision cages are wonderful but they do have some negative aspects.

Bill
 
Back
Top