DVMExotics
Member
Brand New Thermoelectric Incubators that both heat and cool as needed to accurately maintain the temperature of your eggs. Similar to the Exoterra and ReptiPro incubators but larger and more accurate!! The temperature probe can be placed anywhere you want in the incubator for moore precise temperature measurement anbd accuracy.
The incubator is powered and controlled by an accurate thermostat that measures and can be set down to 0.1 degrees with a differential setting that you control for when the temperature reaches as little as 0.1 degrees out of your set range (we can guide you to the best setting for this parameter) to turn on the heating/ cooling unit.
A circulating fan turns on to keep the temperature evenly distributed throughout the chamber.
The thermostat can also be set to a high and low alarm to how many degrees you want it so if the temperature is outside the set temp by that range an audible alarm will go off to alert you.
The settings will maintain if power is lost so no need to worry in those situations.
Precise Thermostat
Heating/ Cooling Unit and Fans
Adjustable Metal Shelf
Glass Door
Full Technical Support
Single Zone:
20.5 high x 17.25 wide x 20.25 deep. $350 plus shipping
28.3 high x 18 wide x 22.25 deep $445 plus shipping
33.4 high x 15.7 wide x 20.3 deep $500 plus shipping
Dual Zone (2 compartments each with own thermostatically controlled temperature zone):
26.5 high x 13.5 wide x 19.4 deep (The top compartment is smaller then the bottom one) $450 plus shipping
33.4 high x 15.7 wide x 20.3 deep (The compartments split even top and bottom) $585 plus shipping
Allows temperature sexing or incubation of different species.
I do ship these at reasonable prices.
Can also be picked up at certain Reptile Expos if prepaid.
Check out a review article about our single zone incubator in Gecko Time Magazine....
http://www.geckotime.com/a-tale-of-three-incubators/
Some units in stock ready to ship or built to order in timely fashion.
Please EMAIL me with questions at [email protected] nest way to get me. Don't check posts often enough.
Thanks for looking
Chris
The incubator is powered and controlled by an accurate thermostat that measures and can be set down to 0.1 degrees with a differential setting that you control for when the temperature reaches as little as 0.1 degrees out of your set range (we can guide you to the best setting for this parameter) to turn on the heating/ cooling unit.
A circulating fan turns on to keep the temperature evenly distributed throughout the chamber.
The thermostat can also be set to a high and low alarm to how many degrees you want it so if the temperature is outside the set temp by that range an audible alarm will go off to alert you.
The settings will maintain if power is lost so no need to worry in those situations.
Precise Thermostat
Heating/ Cooling Unit and Fans
Adjustable Metal Shelf
Glass Door
Full Technical Support
Single Zone:
20.5 high x 17.25 wide x 20.25 deep. $350 plus shipping
28.3 high x 18 wide x 22.25 deep $445 plus shipping
33.4 high x 15.7 wide x 20.3 deep $500 plus shipping
Dual Zone (2 compartments each with own thermostatically controlled temperature zone):
26.5 high x 13.5 wide x 19.4 deep (The top compartment is smaller then the bottom one) $450 plus shipping
33.4 high x 15.7 wide x 20.3 deep (The compartments split even top and bottom) $585 plus shipping
Allows temperature sexing or incubation of different species.
I do ship these at reasonable prices.
Can also be picked up at certain Reptile Expos if prepaid.
Check out a review article about our single zone incubator in Gecko Time Magazine....
http://www.geckotime.com/a-tale-of-three-incubators/
Some units in stock ready to ship or built to order in timely fashion.
Please EMAIL me with questions at [email protected] nest way to get me. Don't check posts often enough.
Thanks for looking
Chris
