TonySmoot222
New member
Custom-made 8×5.5×4 reptile enclosure
I'm trying to sell my custom 8×5.5×4 reptile enclosure. My monitor passed away a while ago and I need to sell it before I move in August.
Made out of mostly pine and plywood. Windows on the doors are plexiglass. Outside isn't super pretty, but since it's plain you could paint it and make it your own! I made it in 2 sections to make handling it easier. The bottom section is lined with FRP(Fiber Reinforced Plastic) all the way up and is waterproofed. The inside of the top section is painted and weatherproofed. Also has 2 vents, one on the side, and one on the back. It holds humidity VERY well.
I made it with a 5 light ballast, and 5 other light fixtures. 2 for night lights, 1 for a viewing light, and 2 for the ceramic heat emitters I'm throwing in. Day/night light switches on the front with a hand painted cover.
The water tub inside drains out the front for easy cleaning. Also throwing in my Sainsonic infrared thermometer, my ZooMed ReptiTemp 500R thermostat, 2 temperature/humidity readers, and a litter scoop. Also, I have lots of rocks if you need them for the drainage layer in your substrate!
Building this cost me around $2500 for all the materials and equipment. Hoping to get at least $1000, as it's still in good shape and to be honest, you can't get enclosures this big for anything less than that. I am totally willing to negotiate though!
Pickup only, I live in Carleton Michigan. Serious inquiries only please. Call or text (734)407-9257 and ask for Tony Smoot
I'm trying to sell my custom 8×5.5×4 reptile enclosure. My monitor passed away a while ago and I need to sell it before I move in August.
Made out of mostly pine and plywood. Windows on the doors are plexiglass. Outside isn't super pretty, but since it's plain you could paint it and make it your own! I made it in 2 sections to make handling it easier. The bottom section is lined with FRP(Fiber Reinforced Plastic) all the way up and is waterproofed. The inside of the top section is painted and weatherproofed. Also has 2 vents, one on the side, and one on the back. It holds humidity VERY well.
I made it with a 5 light ballast, and 5 other light fixtures. 2 for night lights, 1 for a viewing light, and 2 for the ceramic heat emitters I'm throwing in. Day/night light switches on the front with a hand painted cover.
The water tub inside drains out the front for easy cleaning. Also throwing in my Sainsonic infrared thermometer, my ZooMed ReptiTemp 500R thermostat, 2 temperature/humidity readers, and a litter scoop. Also, I have lots of rocks if you need them for the drainage layer in your substrate!
Building this cost me around $2500 for all the materials and equipment. Hoping to get at least $1000, as it's still in good shape and to be honest, you can't get enclosures this big for anything less than that. I am totally willing to negotiate though!
Pickup only, I live in Carleton Michigan. Serious inquiries only please. Call or text (734)407-9257 and ask for Tony Smoot
