• In case most of you have not noticed, I made changes to the donation amounts as well as the durations for all of the paid membership levels. Things are winding down here, and this seems to be the most prudent way to deal with the "end of life" period of this site.

    Contributor level members - $10 per 30 days
    Sponsors - Eliminated
    Benefactor level members - $25 per 30 days
    Endowment level members - $50 per 30 days

    On July 1, 2027, all paid memberships will be closed.

    On August 1, 2027, FaunaClassifieds will be terminated.

    Only change I expect that might take place is when I can get around to figuring out when the amount of money I would have to refund for the yearly paid memberships becomes less than the monthly expense of leasing my server, THAT date might be the termination date for the site.
  • Responding to email notices you receive.
    **************************************************
    In short, DON'T! Email notices are to ONLY alert you of a reply to your private message or your ad on this site. Replying to the email just wastes your time as it goes NOWHERE, and probably pisses off the person you thought you replied to when they think you just ignored them. So instead of complaining to me about your messages not being replied to from this site via email, please READ that email notice that plainly states what you need to do in order to reply to who you are trying to converse with.

Heat set up question(s)

T

TigerLily315

New member
Joined
Aug 7, 2013
Messages
85
Reaction score
0
Points
0
Location
Watertown, New York
I purchased a small shelf to hold my two sterlite(sp) containers for my baby bps. I also purchased 2 small UTHs and a thermostat... Do I put the UTH under the shelf itself (I dont want to use the adhesive pad so I purchased temflex tape) or onto the bottom of the containers. Any advice would be greatly appreciated. I would have used flexwatt, but a lot of people locally have been having problems (shorts/fires), so, I am going to try this method.
 
Honestly if it were me I would set them up for back heat. Stick it straight to the board on the inside and then use the thermostat to regulate them.
 
Back
Top