• In case most of you have not noticed, I made changes to the donation amounts as well as the durations for all of the paid membership levels. Things are winding down here, and this seems to be the most prudent way to deal with the "end of life" period of this site.

    Contributor level members - $10 per 30 days
    Sponsors - Eliminated
    Benefactor level members - $25 per 30 days
    Endowment level members - $50 per 30 days

    Account Upgrades Page
  • Responding to email notices you receive.
    **************************************************
    In short, DON'T! Email notices are to ONLY alert you of a reply to your private message or your ad on this site. Replying to the email just wastes your time as it goes NOWHERE, and probably pisses off the person you thought you replied to when they think you just ignored them. So instead of complaining to me about your messages not being replied to from this site via email, please READ that email notice that plainly states what you need to do in order to reply to who you are trying to converse with.

incubator from wine fridge

P&A Pythons

P&A Pythons

Member
Joined
Apr 25, 2011
Messages
371
Reaction score
12
Points
18
Location
Putnam CT
I need some imput on this it is a 50 bottle unit maybe 7 cuft. I gutted it and moved a wall so to speek in back this back area is like a false wall where i can put the tape and there is a fan already mounted on wall. So what way should i direct flow of air. Have it pulling air from cold bottom moving it over the heat tape then out the top. Or have the warm air from top of fridge pulled over tape and pushed out the cool bottom. To me the first method makes more sense. Also how many watts per cu ft do u recommend for heat tape. I was gonna do 11 inch but if i do 3 inch i get more watts and less space is used. total system would be 140 watts . If i ran 11 inch the whole back wall and floor would have to be covered and then some with 3 inch obvious more connections but all tape would b hidden behind wall. What do think this is the first one i built so any imput would help alot
 
Back
Top