• In the past two days I have gotten emails asking about being requested to provide credit card info in order to register and also to make a post in the classifieds forums. PLEASE NOTE: In no instance will this site ask you for this sort of information. The only time any request for payment is made is if you choose to opt-in for a higher membership level, and that is done SOLELY through PayPal. Anything else is coming from a source other than this site. My guess is that this is coming through Google Adsense, but when I can get someone to send me a screen shot of this sort of request, I will know more.
  • Responding to email notices you receive.
    **************************************************
    In short, DON'T! Email notices are to ONLY alert you of a reply to your private message or your ad on this site. Replying to the email just wastes your time as it goes NOWHERE, and probably pisses off the person you thought you replied to when they think you just ignored them. So instead of complaining to me about your messages not being replied to from this site via email, please READ that email notice that plainly states what you need to do in order to reply to who you are trying to converse with.

Lighting help-Powersun and Basking temp difference

H

HappyHerp777

New member
Joined
Dec 21, 2015
Messages
1
Reaction score
0
Points
0
Location
Morgantown, WV
I’m setting up a 36x18x12 enclosure for a baby Morrocan Uromastyx. I have three light sources-one 75w repti basking light and a 100W power sun as well as another uvb only bulb for the cool side. I check temps on the powersun and basking light and that 75w is reading 115 f and the 100W powersun is only at 107f. To me this isn’t making sense, having the powersun at a lower temp and a higher watt bulb. The measurements are taken from direct placement on the screen to 1/4 inch off the floor, approximately 12” span. I plan on keeping the warm side at 122-125 and the cool at 85-90, but am baffled at this, as I was told the powersun at 100W would be enough by itself and it’s providing less heat than the 75w basking bulb. Any thoughts or recommendations?

My only thought was the Powersun bulb could be a dud or someone returned a used bulb.
 
I could be wrong, the bulbs wattages are not the only thing that affect the concentration of heat. To me, a basking bulb is more focused to a specific area like a spot light and the power sun is more of a cover a larger area type bulb. This is the reason for different temps, the bulbs are designed for different applications.
 
I agree with Jason.

Even among incandescent basking lamps (such as the 75w you are currently running), there is a big difference between different brands in terms of heat spread and high temps at a given distance. I have a favorite brand that is based almost entirely on the focus of the lamp; when I try to switch brands I can't get the heat level/spread correct even with a dimmer.

I have experience with only a couple self-ballasted MV lamps (and this was so far in the past I don't recall the details), but you would likely find similar differences between brands of MV lamps as well. So trying a different brand of MV might give the temps you're looking for, or you might simply try the 160w -- depends if your application needs more overall heat or simply a better focus of the amount of heat a 100w MV provides.

Edit to add: AFAIK, as MV lamps age or fail, they don't get cooler (though the spectrum changes and they emit less UV). I doubt your issue is a bad/old lamp.
 
Back
Top