• In case most of you have not noticed, I made changes to the donation amounts as well as the durations for all of the paid membership levels. Things are winding down here, and this seems to be the most prudent way to deal with the "end of life" period of this site.

    Contributor level members - $10 per 30 days
    Sponsors - Eliminated
    Benefactor level members - $25 per 30 days
    Endowment level members - $50 per 30 days

    Account Upgrades Page
  • Responding to email notices you receive.
    **************************************************
    In short, DON'T! Email notices are to ONLY alert you of a reply to your private message or your ad on this site. Replying to the email just wastes your time as it goes NOWHERE, and probably pisses off the person you thought you replied to when they think you just ignored them. So instead of complaining to me about your messages not being replied to from this site via email, please READ that email notice that plainly states what you need to do in order to reply to who you are trying to converse with.

General Snake Housing Unit Question

unbeatablebonz

unbeatablebonz

Member
Joined
Apr 15, 2011
Messages
147
Reaction score
1
Points
18
Location
New City, NY, USA
Hi,

I just purchased a dozen units that measure 48w x 24d x 18 H. They are prewired with two separate lighting fixtures. The previous owned used them for Beardies. I'm using them for Cribos, Indigos, Carpets, Bloods & different Boa's. Each unit is wired separately allowing me to use separate thermostats.

Thoughts on a few things.

There is both a fixture for a fluorescent bulb and a separate fixture for either a ceramic heat emitter or any various kind of bulb. Is it safe to use these kinds of bulbs or heat sources without some kind of protective cover to prevent the animal from both burning itself or simply breaking the bulb? Any suggestions would be appreciated.

Mike
 

Attachments

  • Screen Shot 2020-03-17 at 5.42.27 PM.jpg
    Screen Shot 2020-03-17 at 5.42.27 PM.jpg
    150.5 KB · Views: 155
  • Screen Shot 2020-03-17 at 5.43.52 PM.jpg
    Screen Shot 2020-03-17 at 5.43.52 PM.jpg
    81.5 KB · Views: 134
  • Screen Shot 2020-03-17 at 5.44.42 PM.jpg
    Screen Shot 2020-03-17 at 5.44.42 PM.jpg
    75.2 KB · Views: 131
unbeatablebonz said:
There is both a fixture for a fluorescent bulb and a separate fixture for either a ceramic heat emitter or any various kind of bulb. Is it safe to use these kinds of bulbs or heat sources without some kind of protective cover to prevent the animal from both burning itself or simply breaking the bulb? Any suggestions would be appreciated.
Click to expand...

I would highly recommend not using those sources of heat and going with something like an RHP (radiant heat panel) if you can. Snakes will climb and yes they will climb on a hot bulb.

Back in the day when I had an exposed incandescent light in a wood cage for a boa, I bought a wire cage harness that went over the bulb (screwed into the top of the cage and fully surrounded the bulb) so she could not come into direct contact with it. Deff do something like that if you decide to use them for heat.

best of luck! They look like nice cages.
 
Thanks for replying - I ordered VE 80 watt radiant heat panels that I will use instead of the ceramic heat emitter. It should be easy enough to swap out as its wired.
 
Back
Top