Today one of the mouse building air conditioners died so I had to replace it with a new unit I bought as a backup a few weeks ago. I always keep a spare around for when this happens.
Anyway I was talking to Doug Barr about the new electronic a/c units and he pointed out that they have a design "feature" that may prove to be problematical. With the old manual designs, when the power goes out, then comes back on, the a/c will simply power up and pick up where it left off at the last setting. With the new electronic units (hopefully not ALL of them) when the power goes out, then comes on, the units are dead until someone manually presses the button on the unit.
Now, this is a BIG problem for me. I have an automatic generator that will power on in case of a power outage. I got this as a safety feature for when we are away from home. But this is not going to do me a bit of good at all if the power goes out, yet the a/c units in the mouse building remain off. Matter of fact, when we got back, it would be a certainty that all of the mice in that building will be dead.
So this is a real problem. And could become worse as all the manufacturers might be going to this new electronic style a/c unit. So has anyone else run into this problem? Is there a way to modify the electronic units to automatically come on, or am I just sol and have to find the older manual models where ever I can?
Personally this is dumb as dirt to me. Even in a residence with a window A/C, it would seem to me that if they were away on a trip, they would want that a/c to come back on after a power outage. In central Florida in August, if the a/c would not crank back up, it would get extremely hot within a dwelling. If they had any sort of pet inside, it would most certainly die from the heat. So I can't believe this type of problem has cropped up for them yet about this design change.
Any ideas?
Anyway I was talking to Doug Barr about the new electronic a/c units and he pointed out that they have a design "feature" that may prove to be problematical. With the old manual designs, when the power goes out, then comes back on, the a/c will simply power up and pick up where it left off at the last setting. With the new electronic units (hopefully not ALL of them) when the power goes out, then comes on, the units are dead until someone manually presses the button on the unit.
Now, this is a BIG problem for me. I have an automatic generator that will power on in case of a power outage. I got this as a safety feature for when we are away from home. But this is not going to do me a bit of good at all if the power goes out, yet the a/c units in the mouse building remain off. Matter of fact, when we got back, it would be a certainty that all of the mice in that building will be dead.
So this is a real problem. And could become worse as all the manufacturers might be going to this new electronic style a/c unit. So has anyone else run into this problem? Is there a way to modify the electronic units to automatically come on, or am I just sol and have to find the older manual models where ever I can?
Personally this is dumb as dirt to me. Even in a residence with a window A/C, it would seem to me that if they were away on a trip, they would want that a/c to come back on after a power outage. In central Florida in August, if the a/c would not crank back up, it would get extremely hot within a dwelling. If they had any sort of pet inside, it would most certainly die from the heat. So I can't believe this type of problem has cropped up for them yet about this design change.
Any ideas?