• In case most of you have not noticed, I made changes to the donation amounts as well as the durations for all of the paid membership levels. Things are winding down here, and this seems to be the most prudent way to deal with the "end of life" period of this site.

    Contributor level members - $10 per 30 days
    Sponsors - Eliminated
    Benefactor level members - $25 per 30 days
    Endowment level members - $50 per 30 days

    Account Upgrades Page
  • Responding to email notices you receive.
    **************************************************
    In short, DON'T! Email notices are to ONLY alert you of a reply to your private message or your ad on this site. Replying to the email just wastes your time as it goes NOWHERE, and probably pisses off the person you thought you replied to when they think you just ignored them. So instead of complaining to me about your messages not being replied to from this site via email, please READ that email notice that plainly states what you need to do in order to reply to who you are trying to converse with.

Under Tank Heater Size Question?

Tangerine Gecko

New member
Joined
May 26, 2014
Messages
4
Reaction score
0
Points
0
Location
The Woodlands, Texas
I'm getting a leopard gecko pretty soon, and I will be housing him in a 24"x18"x12" Exo Terra medium-low enclosure. I believe that this is a 22 gallon enclosure, after I did the calculations...? But, I don't know if I should get a small or medium Zoo Med uth, since the size of this enclosure is between 20 and 30 gallons... Does anyone know what size I should get? I'm getting a Herpstat 1 Basic for the temperature control, so if the medium uth was too big, it would probably be able to maintain the heat from getting too high, right?

Thanks in advance for your help.
 
It won't matter. Go ahead and oversize it so you have some comfort for winter. Two notes on the basic one though.
1. Not sure what animal you have but I'd recommend a humidity control or guage at the least.
2. Make sure to calibrate it.
I've never heard of problems with it standard but I wouldn't want you to be the first either. Especially with me telling you it's ok to oversize the uth lol
 
Haha, that's okay! Thanks for your help. I agree with you, a bigger uth couldn't hurt. I ended up getting the medium sized one, and the Herpstat 1 instead because I liked the additional built in safety relay function that it comes with. I'll be sure to calibrate it.
Correct me if I'm wrong, but I don't think I'll be able to hook up both the under tank heater and a humidity control/gauge at the same time to this model of herpstat... it has only one probe outlet, and I'll be using it for temperature. So I'll need to get a separate humidity gauge then... Do you feel that the gecko would be okay with a humidity gauge instead of a humidity controller as long as I am careful with the moisture levels in the humid hide and keep it and the water dish on the cool side of his tank?

Assuming that would be okay, do you have any suggestions for good humidity gauges? I'm leaning towards an Acu-Rite 00611. Also, would I keep this on the cool side or the warm side of the cage?
 
No you would have to get a separate guage for your cage. As long as you keep your eyes on it, especially while the cage is first set up, you should be ok. The humidity guage typically goes in the middle towards the ground for the best thing. And the acu rite would be fine. Just anything digital really.
 
Back
Top